ar3330p062502a

Replace deep-groove ball bearing in intermediate shaft

Type ar · emne 33.30 · version 0109 · 2006-07-26

Gælder for: MODEL 203.08 /09 /28 /29, 210.08 /28, 220.08 /18, 211.08 /09 /28 /29

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 203 (modeller 08*, 09*, 28*, 29*) · Serie 210 (modeller 08*, 28*) · Serie 211 (modeller 08*, 09*, 28*, 29*) · Serie 220 (modeller 08*, 18*)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel — Serie 203 (modeller 08*, 09*, 28*, 29*) · Serie 210 (modeller 08*, 28*) · Serie 211 (modeller 08*, 09*, 28*, 29*) · Serie 220 (modeller 08*, 18*)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.65 forakseldrev/akselkraftgennemføring — Serie 203 (modeller 08*, 09*, 28*, 29*) · Serie 210 (modeller 08*, 28*) · Serie 211 (modeller 08*, 09*, 28*, 29*) · Serie 220 (modeller 08*, 18*)

AR33.30-P-0625-02A

Replace deep-groove ball bearing in intermediate shaft

Replace deep-groove ball bearing in intermediate shaft

Two-armed puller

000 589 88 33 00

Commercially available tools

Number

Designation

WH58.30-Z-1009-02A

Pliers for circlip, inner

Replace deep-groove ball bearing in intermediate shaft

P33.30-0257-01

Removing

1 Take out circlip (35a) for grooved ball bearing (35) using pliers .

Replace deep-groove ball bearing in intermediate shaft

P33.30-0258-01

2 Detach grooved ball bearing (35) using puller (035).

Replace deep-groove ball bearing in intermediate shaft

P33.30-0259-01

Install

3 Check circlip (35) and replace if necessary.

Ensure correct seat in groove.

4 Press in grooved ball bearing (35) using press.

For this purpose the grooved ball inner race must be underlaid with a shim.

Replace deep-groove ball bearing in intermediate shaft

P33.30-0257-01

5 Insert circlip (35a) for grooved ball bearing (35) using pliers .

Ensure correct seat in groove.