ar3330p0010xga

Check oil level in front axle differential, correct if necessary

Type ar · emne 33.30 · version 0201 · 2020-08-19

Gælder for: Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 176 · Serie 177 · Serie 463

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.65 forakseldrev/akselkraftgennemføring — Serie 176 · Serie 177 · Serie 463

Gælder også for motorer/gearkasser: 264 ***

AR33.30-P-0010XGA

Check oil level in front axle differential, correct if necessary

13.07.2020

Model

463 with engine 176, 177

as of model year 2019

Model

463 with engine 264

as of model year 2019

Check oil level in front axle differential, correct if necessary

1

Front axle transmission

3

Filling screw

P33.00-2151-11

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Remove

1

Remove lower center engine compartment lining.

AR61.20-P-1105XG

2

Clean area around filling screw (3).

Loctite 7063 (400 ml) cleaning spray

*BR00.45-Z-1046-04A

3

Remove filling screw (3).

Check

4

Check and correct oil level.

If the oil level is correct, the hypoid gear oil reaches up to the lower edge of the threaded hole.

If the oil level is too low,

add the hypoid gear oil using the hand pump until the hypoid gear oil reaches up to the lower edge of the filling screw threaded hole (3).


BB00.40-P-0235A

Hand pump

*210589007100

Install

5

Coat first thread pitch of filling screw (3) with Omnifit 100H quick-acting adhesive.

Quick-acting adhesive Omnifit 100H (50 g)

*BR00.45-Z-1110-02A

6

Screw in filling screw (3).

Oil filler screw/drain screw to front axle transmission

*BA33.30-P-1006-03C

7

Check front axle differential (1) for leak tightness.

If leakage is present:

Seal front axle differential (1).


AR33.30-P-0542XGA

8

Install bottom center engine compartment lining.

AR61.20-P-1105XG

Front axle gear

Number

Designation

Model 463
as of model year 2019

BA33.30-P-1006-03C

Oil filler screw/drain screw to front axle transmission

M24

Nm

90

Check oil level in front axle differential, correct if necessary

210 589 00 71 00

Hand pump

Repair materials

Number

Designation

Order number

BR00.45-Z-1046-04A

Loctite 7063 (400 ml) cleaning spray

A 001 986 71 71 09

BR00.45-Z-1110-02A

Quick-acting adhesive Omnifit 100H (50 g)

A 002 989 23 71

Henviste dokumenter