Detaching front axle gear from front axle

Type ar · emne 33.30 · version 0100 · 2002-02-19

Gælder for: MODEL 903.6, 904.6 with CODE (ZG1) Engageable all-wheel drive MODEL 903.6, 904.6 with CODE (ZG2) Permanent all-wheel drive MODEL 903.6, 904.6 with CODE (ZG3) Reduction ratio for all-wheel drive

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.65 forakseldrev/akselkraftgennemføring — Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

AR33.30-D-0525-03B

Detaching front axle gear from front axle

D33.30-1103-01

1 Unscrew front transmission bracket (2) from front axle gear (1).

2 Unscrew ventilation hose (6) from front axle gear (1) and remove
seals (10).

 Seal off connection with plug.

D33.30-0004-01

D33.30-1104-01

3 Unscrew nuts (9) and remove bolts from right transmission bracket (3) at front and rear.

D33.30-1105-01

D33.30-1106-01

4 Unscrew bolts (11) holding center transmission bracket on front axle gear.

5 Slacken nut (8) and turn center transmission bracket (4) downwards.

6 Unscrew nuts (7) and remove bolts from rear transmission carrier (5).

D33.30-1107-01

7 Unscrew nut (13) and bolts (12) and remove drive support (14) from front axle carrier.

D33.30-1108-01