Detach/attach drive shaft on front axle gear

Type ar · emne 33.30 · version 0100 · 2008-02-06

Gælder for: MODEL 906 with CODE (ZG1) Engageable all-wheel drive MODEL 906 with CODE (ZG2) Permanent all-wheel drive MODEL 906 with CODE (ZG3) Engageable all-wheel drive with gear reduction MODEL 906 with CODE (ZG4) Permanent all-wheel drive with gear reduction

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 906

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel — Serie 906

AR33.30-D-0100-01H

Detach/attach drive shaft on front axle gear

 Input shaft

Number	Designation		Model 906 with code ZG1, ZG2, ZG3, ZG4


BA33.30-N-1001-07A	Bolt, input shaft to front axle gear	Nm	58

Repair materials

Number	Designation	Order number
BR00.45-Z-1059-02A	Loctite 262	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de

Detach/attach drive shaft on front axle gear

D33.30-1125-01

Removal

1 Mark installation position of drive shaft (1) relative to output flange (2).

2 Remove drive shaft (1) from output flange (2).

Attaching

3 Mount front axle shaft (1) onto output flange (2), .

 Observe marking. Apply light coating of thread locking compound to bolts.