Inspect steering knuckle · ar3325b0500d · Mercedes-Benz WIS

AR33.25-B-0500D

Inspect steering knuckle

12.02.16

Front axle 732 with Vehicle 695.304, 695.010, 695.011

B33.25-0030-01

B33.25-0027-01

A Ø internal bearing seat

B Ø external bearing seat

C Knuckle length

1 Shaft end

2  Dial gauge

3  Dial gauge holder

	Check
1	Visually examine the knuckle for damages, cracks, and wearing of the bearings seats	 If it as verified the existence of cracks,as well as an excessive wearing of the bearings seats, replace the knuckle.
2	Measure the knuckle	 if the dimensions are not withing the tolerances, replace the knuckle.	*BE33.25-B-1001-01A
3	Fit the knuckle, by means of its centering holes, in one between points and check the bearing seats eccentricity	 If the tolerance is exceeded, replace the knuckle.	*BE33.25-B-1002-01A
		 Dial gauge	*001589532100
		 Dial gauge holder	*363589022100

Steering knuckle

Número	Denominação			Front axle 732.793/794


BE33.25-B-1001-01A	Shaft end	Measurement A	mm	69.971...69.990
		Measurement A1	mm	-
		Measurement B	mm	49.975...49.991
		Measurement C	mm	202.000...202.3
BE33.25-B-1002-01A	Maximum allowed eccentricity between the shaft end bearing seats		mm	0.02

363 589 02 21 00

Dial gauge holder

001 589 53 21 00

Dial gauge