ar3320p044601ff

Pry off, attach flange joint at steering knuckle

Type ar · emne 33.20 · version 0103 · 2010-09-23

Gælder for: MODEL 454.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.20 Hjulleje, nav — Serie 454 (modeller 0**)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.42 akselspindel/hjulnav/hjulleje — Serie 454 (modeller 0**)

AR33.20-P-0446-01FF

Pry off, attach flange joint at steering knuckle

Trailing arms, wishbones

Number

Designation

Model
454.0 with engine 122.950

Model
454.0 with engine 134.910/
911

Model
454.0 with engine 135.930/
950

Model
454.0 with engine 639.939

BA33.15-P-1002-01D

Nut, flange joint to steering knuckle

Nm

60

60

60

60

Pry off, attach flange joint at steering knuckle

Puller

454 589 00 33 00

Pry off, attach flange joint at steering knuckle

P33.20-2105-01

1 Loosen nut (2).

If the bolt of the flange joint (1) turns at the same time when loosening the nut (2), the flange joint (1) must be supported using a transmission jack.

Transmission jack

gotis://H_00.10_01.0

2 Pry off flange joint (1) using puller (3).

3 Unscrew nut (2).

Installation: Replace nut (2).

4 Pull down transverse control arm (5) and pull flange joint (1) out of the steering knuckle (4).

Push transverse control arm (5) on front axle down only as far as required, as otherwise the rubber bushings in the transverse control arm (5) may be damaged.

5 Install in the reverse order.