AR33.20-P-0440I | Replace supporting joint | 25.2.98 |
MODEL 215
MODEL 220 (except 220.08 /18 /87)
except CODE (979) Special protection version
except CODE (Z07) Top protection
P33.20-2125-05
Shown on steering knuckle on model 220
5 Steering knuckle
7 Support joint
| Remove/Install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the four pillars of the hoist and position the four support plates at the hoist mounting points specified by the vehicle manufacturer. | |
| Notes on self-locking nuts and bolts | ||
| When carrying out service and repair operations on the front-end assembly, always take great care to prevent leaving scratches, notches or fissures in the aluminum components. Otherwise the service life of the parts will be affected | ||
Installation | Tighten nuts and bolts of chassis components only in curb condition. | ||
1 | Remove steering knuckle (5) | Do not remove brake disk, front wheel hub and brake cover. | |
2 | Check supporting joint (7) | ||
3 | Press supporting joint (7) out of steering knuckle (5) | ||
Extraction and insertion tool | |||
Press | |||
Pressure screw | |||
4 | Install in the reverse order |
202 589 04 43 10
Thrust bolt
Press
Removal and installation tool
220 589 03 43 00
202 589 04 43 11
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar3320p0425i
- ar3320p044001i
- ar3325p0400i
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.