ar3320p044002h

Pressing off and attaching supporting joint at lower wishbone

Type ar · emne 33.20 · version 0200 · 2006-09-19

Gælder for: MODEL 240

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.20 Hjulleje, nav — Serie 240

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.41 tværgående styrestang/styring/stabilisator — Serie 240

AR33.20-P-0440-02H

Pressing off and attaching supporting joint at lower wishbone

Modification notes

14.9.06

Self-locking nut, supporting joint to lower transverse control arm

*BA33.20-P-1003-01H

Wheel location, hub

Number

Designation

Model
240

BA33.20-P-1003-01H

Self-locking nut, supporting joint to lower transverse control arm

Stage 1

Nm

60

Stage 2

°

120

Pressing off and attaching supporting joint at lower wishbone
Pressing off and attaching supporting joint at lower wishbone

163 589 03 43 00

Press

Puller

220 589 00 33 00

Pressing off and attaching supporting joint at lower wishbone

P33.20-2058-06

Pushing off

1 Swivel steering knuckle (5) outward.

Do not subject the electrical feed lines (1) to pulling forces, otherwise they will be damaged.

2 Loosen nut (7b) by several threads.

3 Pry supporting joint (7) out of lower transverse control arm (17) using puller (045) and press (044).

4 Remove puller (045) and press (044).

5 Unscrew nut (7b) and remove supporting joint (7).

Attaching

6 Clean cone on lower transverse control arm (17) and supporting joint (7).

The conical joint must be free of oil and grease.

7 Replace nut (7b) and attach supporting joint (7) to lower transverse control arm (17) .