ar3320p044001vm

Pressing out and attaching supporting joint at steering knuckle

Type ar · emne 33.20 · version 0104 · 2006-05-04

Gælder for: MODEL 211.08 /09 /28 /29

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.20 Hjulleje, nav — Serie 211 (modeller 08*, 09*, 28*, 29*)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.42 akselspindel/hjulnav/hjulleje — Serie 211 (modeller 08*, 09*, 28*, 29*)

AR33.20-P-0440-01VM

Pressing out and attaching supporting joint at steering knuckle

Wheel location, hub

Number

Designation

Model
211.08/09/28/29

BA33.20-P-1017-01A

Self-locking nut, supporting joint to steering knuckle

Stage 1

Nm

70

Stage 2

°

50

Pressing out and attaching supporting joint at steering knuckle
Pressing out and attaching supporting joint at steering knuckle

203 589 00 33 00

Puller

Thrust piece

140 589 00 63 00

Pressing out and attaching supporting joint at steering knuckle

P33.20-2084-01

Pushing off

1 Unscrew self-locking nut from supporting joint (7) on steering knuckle (5).

2 Attach thrust piece (07a).

3 Use puller (07) to press out supporting joint (7).

4 Remove puller (07) and thrust piece (07a).

Install

5 Clean tapered connection.

The cone and thread must be free of grease and oil.

6 Tighten self-locking nut on supporting joint .

Replace self-locking nut.