AR33.20-P-0425TX | Checking supporting joint and follower joint of steering knuckle mount (removed) | 26.10.05 |
MODEL 219
P33.20-2134-02
7f Supporting joint rubber boot
8f Follower joint rubber boot
P33.20-2133-02
| Checking | ||
1 | Move the ball pin in all directions with an approximately 150 mm long pipe | The ball stud should move without play and without seizing, and should not cause any creaking noise. | |
2 | Check rubber boot (7f) on supporting joint for cracks and damage | Replace supporting joint if necessary. | |
3 | Check rubber boot (8f) on follower joint for cracks and damage | If necessary, replace follower joint: | |
Remove/install follower joint of steering knuckle bearing. |