ar3320d637601a

Removing and pressing in wishbone supporting joint

Type ar · emne 33.20 · version 0105 · 2001-08-09

Gælder for: MODEL 901, 902 with FRONT AXLE 730.408 /410 MODEL 902, 903 with FRONT AXLE 730.409 MODEL 903 with FRONT AXLE 730.413 MODEL 904 with FRONT AXLE 730.411 /414 MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG1) Engageable all-wheel drive MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG2) Permanent all-wheel drive MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG3) Reduction ratio for all-wheel drive MODEL 905 with FRONT AXLE 730.606 MODEL 690.6 with FRONT AXLE 732.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.20 Hjulleje, nav — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.41 tværgående styrestang/styring/stabilisator — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

Gælder også for motorer/gearkasser: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 730 606, 732 2**

AR33.20-D-6376-01A

Removing and pressing in wishbone supporting joint

Removing and pressing in wishbone supporting joint
Removing and pressing in wishbone supporting joint

730 589 02 43 00

730 589 01 43 00

Installer

Drift with counterholder

Removing and pressing in wishbone supporting joint

D33.20-0028-01

Removing

1 Press supporting joint out of wishbone (1) using drift and counterholder (3, 4).

Removing and pressing in wishbone supporting joint
Removing and pressing in wishbone supporting joint

D33.20-0019-01

D33.20-0018-01

Installing

2 Place wishbone on counterholder (5) and fit new supporting joint (2) on wishbone.

3 Press in supporting joint using
drift (6).