Extraction and press-in tools
220 589 06 43 00
Workshop equipment
WE58.40-Z-1001-12A | Stationary workshop press 65 t |
P33.15-2072-06
1 Mark position of rubber bushing (17d) relative to track control arm (17).
P33.15-2071-01
Press out rubber mount (17d)
2 Press rubber mount (17d) out of the spring control arm (17) using the press out/in tool (011, 012).
011 Press out/in tool, part 01
012 Press out/in tool, part 02
P33.15-2070-01
Press in new rubber mount (17)
3 Transfer alignment mark to new rubber bushing (17d).
4 Position chamfer of rubber mount (17d) onto chamfer of spring control arm (17).
The rubber bushing slot (17d) must align with the linear axis of the track control arm (17).
5 Press in the rubber mount (17d) using the press out/in tool (011, 012) until the collar of the press out/in tool (011), contacts the spring control arm (17).
When pressing in make sure that the rubber mount (17d) does not twist or turn.