ar3315p017001tx

Pressing track control arm from the stub axle assembly

Type ar · emne 33.15 · version 0106 · 2006-05-04

Gælder for: MODEL 219.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.15 Akselstyrearme — Serie 219 (modeller 3**)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.42 akselspindel/hjulnav/hjulleje — Serie 219 (modeller 3**)

AR33.15-P-0170-01TX

Pressing track control arm from the stub axle assembly

Wheel location, hub

Number

Designation

Model
219.3

BA33.20-P-1003-01K

Self-locking nut, track control arm to stub axle

Stage 1

Nm

50

Stage 2

°

60

Pressing track control arm from the stub axle assembly
Pressing track control arm from the stub axle assembly
Pressing track control arm from the stub axle assembly

163 589 03 43 00

Thrust piece

Press

Puller

220 589 00 33 00

140 589 00 63 00

Pressing track control arm from the stub axle assembly

P33.15-2067-06

1 Unscrew self-locking nut of spring control arm (17) at steering knuckle (5).

Installation: Replace self-locking nut.

2 Screw the thrust washer (044a) onto the carrying joint.

3 Apply the puller (035).

4 Use the press (064) to press the spring control arm (17) out of the steering knuckle (5) by turning the press spindle.

Do not damage the rubber boot on the supporting joint when pressing out.