Extractor and insertion tools
220 589 06 43 00
Workshop equipment
WE58.40-Z-1001-12A | Stationary workshop press 65 t |
P33.15-2045-01
Pressing out
1 Identify rubber mount (1) relative to torque strut (2) (arrow).
P33.15-2046-01
2 Position press-out tool on the chamfered side.
Use 220 589 06 43 05 and 220 589 06 43 06 from the tool set from
pressing parts in and out.
P33.15-2047-01
3 Press out rubber mount (1).
4 Check bore of torque strut (2).
Should the bore have score marks, the torque strut (2) should be replaced.
P33.15-2050-01
Pressing in
5 Align rubber mount (1) as per the marking and press into the torque strut (2) with the chamfered side forward.
The groove (4) and rubber lug (5) must be aligned with the ball head as shown
in the picture.
P33.15-2049-01
6 Press in rubber mount (1) as far as the stop.