MODEL | 203.### #F as of 018700 |
MODEL | 209 |
220 589 06 43 00
Extraction and insertion tool
Shown on model 204, rubber mount with elongated hole
Mark
1 | Mark rubber mount (1) relative to strut rod (2) (arrow). |
P33.15-2045-01
Press out
All listed special tools are available in the extraction and insertion tool set.
2 | Position press-out tool against chamfer side (see picture). |
Use 220 589 06 43 06, 220 589 06 43 05 from the extraction and insertion tool set. |
P33.15-2046-01
3 | Press out rubber mount (1). |
4 | Check inside of torque strut (2). |
If the inside of the strut rod (2) exhibits score marks, replace the strut rod (2). |
P33.15-2047-01
Press in
5 |
Attach chamfered side of rubber mount (1) to chamfered side of strut rod (2). |
Align marking of rubber mount (A) with marking of strut rod (B). Align bearing core marking (C) with ball head. |
Generally, the rubber mount (1) is to be positioned in the strut rod (2) such that, in the installation position for the strut rod (2), the marking for the rubber mount (A) faces down and the marking for the bearing core (C) outwards (wheel side). |
P33.15-2135-07
Rubber mount with elongated hole |
1 | Rubber mount | A | Marking of rubber mount | C | Bearing core marking | ||
2 | Strut rod | B | Marking of strut rod |
P33.15-2136-07
Rubber mount with round hole |
1 | Rubber mount | A | Marking of rubber mount | C | Bearing core marking | ||
2 | Strut rod | B | Marking of strut rod |
6 | Attach insertion tool to the chamfered side of the strut rod (2) and press in rubber mount (1) as far as the end stop. |
Use 220 589 06 43 06, 220 589 06 43 05 from the extraction and insertion tool set. |
P33.15-2049-01