Serier
da
ar3315p0100gg
Remove/install trailing arm
Type ar · emne 33.15 · version 0116 · 2019-04-08
Gælder for: Model 460 Model 461 (except 461.331)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 33 Foraksel › 33.15 Akselstyrearme — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459)
EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.41 tværgående styrestang/styring/stabilisator — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459)
AR33.15-P-0100GG
Remove/install trailing arm
21.02.2019
Model
460
Model
461 (except 461.331)
06.02.2019
Basic date, added.
Operation step 3
1
Trailing arm
2
Frame
3
Axle
4
Stabilizer bar
5
Drag link
6
Nut
Danger
Risk of death caused by vehicle slipping or toppling off of the lifting platform.
Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.
AS00.00-Z-0010-01A
Topical note
Notes on self-locking nuts and bolts
AH00.00-N-0001-01A
Notes on repair work on suspension components
AH00.00-P-0100-01A
Remove/install
1
Raise vehicle.
AR00.60-P-1000G
2
Remove trailing arm (1) from frame (2).
Installation: Tighten nut with suspension compressed and ensure that elastomer bearings are correctly seated.
Nut, trailing arm to frame
*BA33.15-P-1001-01A
3
Unscrew nut (7) from steering damper and remove steering damper.
Castle nuts may be installed with a cotter pin or self-locking nuts.
Installation: Replace cotter pin or self-locking nut.
Screw, steering damper to tie rod/holder
*BA46.40-P-1005-01D
4
Remove stabilizer bar (4) from trailing arm (1).
Nut, stabilizer bar mounting bar to trailing arm
*BA32.35-P-1001-01A
5
Release nut (6) from drag link (5) at steering arm and unscrew.
Installation: Replace cotter pin.
Castle nut, drag link to pitman arm
*BA46.40-P-1001-04B
6
Remove tie rod from pitman arm.
Puller
*601589043300
7
Remove trailing arm (1) from axle (3).
Installation: Tighten screws or nuts with suspension compressed.
Bolt/nut, trailing arm to axle
*BA33.15-P-1002-01A
8
Remove trailing arm (1).
9
Install in the reverse order.
Stabilizer bar/torsion bar
Number
Designation
Model 460, 461 Model 463 up to model year 2019
BA32.35-P-1001-01A
Nut, stabilizer bar mounting bar to trailing arm
Nm
50
Trailing arms, transverse control arms
Number
Designation
Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1001-01A
Nut, trailing arm to frame
Nm
130
Trailing arms, transverse control arms
Number
Designation
Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1002-01A
Bolt/nut, trailing arm to axle
Nm
225
Number
Designation
Model 460, 461 Model 463 up to model year 2019
BA46.40-P-1001-04B
Castle nut, drag link to pitman arm
Nm
140
Number
Designation
Model 460, 461 Model 463 up to model year 2019
BA46.40-P-1005-01D
Screw, steering damper to tie rod/holder
M10
Nm
60
M8
Nm
30
Henviste dokumenter
