Detach front axle from longitudinal frame member

Type ar · emne 33.10 · version 0300 · 2006-06-20

Gælder for: MODEL 901, 902 with FRONT AXLE 730.408 /410 MODEL 902, 903 with FRONT AXLE 730.409 MODEL 903 with FRONT AXLE 730.413 MODEL 904 with FRONT AXLE 730.411 /414 MODEL 905 with FRONT AXLE 730.606 MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG1) Engageable all-wheel drive MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG2) Permanent all-wheel drive MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG3) Gear reduction for all-wheel drive MODEL 690.6 with FRONT AXLE 732.210 /211 /212 MODEL 903.61 /66 /67 with FRONT AX

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.10 Foraksel komplet — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.30 Foraksel komplet — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

Gælder også for motorer/gearkasser: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 730 415, 730 606, 732 210, 732 211, 732 212

AR33.10-D-0100-05A

Detach front axle from longitudinal frame member

Modification notes

5.4.06

Assembly device for front axle inserted

Step 2

Detach front axle from longitudinal frame member

Assembly tool

906 589 00 62 00

D32.35-1101-01

1 Unscrew the inner bolts (arrows) of the spring clamp plate.

D32.35-1102-01

2 Position the assembly device (01)  with lift under the front axle and screw onto the front axle.

D33.10-0005-01

3 Unscrew axle mounting bolts (16) on left and right sides of frame side member.

4 Slowly lower front axle.

Figure shows front axle 730.413