Attach engine supporting frame and lifting engine

AR33.10-D-0100-01TS

Attach engine supporting frame and lifting engine

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Model

907 with engine 274

Model

907 with engine 651

Model

907.1/2/6 with engine 654.9

1

Remove bolts (1) and place washer fluid reservoir (2) with attached lines and hose to one side.

2

Release and disconnect electrical connection (3).

3

Unclip coolant expansion reservoir (4) from holder (5) and place to one side with attached hoses.

Shown on model 907 with engine 651

4

Model 907 with engine 274
Unscrew nut (13) and push coolant line (14) slightly to one side.

 Push coolant line (14) to one side carefully.
Otherwise the coolant line (14) will be damaged.

5

Model 907 with engine 274
Open retaining clamps (15) and push oil line (16) of transmission oil cooling to one side.

 Push oil line (16) to one side carefully.
Otherwise the oil line (16) will be damaged.

Shown on model 907 with engine 274

6

 Place mounting plates (11) on left and right longitudinal member (12).

 Check that  mounting plates (11) are correctly seated on longitudinal members (12) (arrows).
Otherwise, the  mounting plates (11) may slip off the longitudinal members (12).

7

Remove support of  engine hoist (6) and place to one side.

 Only use the crossbar with the spindle (7) of the  engine support fixture (6).

8

Attach crossbar of  engine support fixture (6)  to mounting plates (11) and tighten thumb screw (8).

Shown on model 907 with engine 651

9

Secure spindle (7) of  engine support fixture (6) to lifting eye (9) using shackle (10).

10

Turn spindle (7) and raise engine as required.

 Raise engine carefully.
Otherwise damage may occur.