652 589 00 33 01
Removal and installation tool
652 589 00 33 02
Removal and installation tool
652 589 00 33 11
Threaded spindle
652 589 00 33 15
Sleeve
950 589 02 33 00
Removal and installation tool
652 589 00 33 23
Hydraulic hose (complete)
652 589 00 33 21
Hand pump
652 589 00 33 22
Hollow cylinder
963 589 00 33 00
Extraction and insertion tool
950 589 01 33 00
Press-in/out tool
652 589 00 33 16
Sleeve
When removing/installing the bushings, care must be taken to ensure that the corresponding insertion and removal tool is used for the different bushing diameters.
For bushing-Ø 58 mm:
Insertion and removal tool 652 589 00 33 01 and
sleeve 652 589 00 33 15
For bushing-Ø 60 mm:
Insertion and removal tool 950 589 02 33 00 and
sleeve 652 589 00 33 15
For bushing-Ø 65 mm:
Insertion and removal tool 652 589 00 33 02 and
sleeve 652 589 00 33 16
For bushing-Ø 72 mm:
insertion and removal tool 963 589 00 33 00
For bushing-Ø 75 mm:
insertion and removal tool 950 589 01 33 00
Remove |
1 | Screw corresponding threaded bush (2) into hollow cylinder (1) and then tighten using threaded rod (7) and corresponding thrust piece on bushing in torsion bar linkage (10). |
2 | Connect hydraulic hose to hand pump and the hollow cylinder (1). |
3 | Operate hand pump and press bushing out of torsion bar linkage (10) (arrow). |
4 | Remove all special tools. |
W32.35-1038-01
Install |
5 | Insert new bushing (4) and corresponding thrust piece (6) into corresponding conical sleeve (5). |
6 | Position hollow cylinder (1) and corresponding conical sleeve (5) onto countersunk diameter of torsion bar linkage (10) and tighten with threaded rod (7). |
W32.35-1035-01
7 | Connect hydraulic hose to hand pump and the hollow cylinder (1). |
8 | Install bushing by operating hand pump into torsion bar linkage (10), while doing so, check installation position of bushing through the cutout (arrow) of conical sleeve (5). |
9 | Remove all special tools. |
W32.35-0004-01
10 | Caulk bushing (4), depending on version of torsion bar linkage (10), 3- or 4times (arrows). |
W32.35-1056-01
W32.35-1042-01