652 589 00 33 02
Threaded spindle
Removal and installation tool
Removal and installation tool
Hand pump
652 589 00 33 01
652 589 00 33 11
652 589 00 33 21
652 589 00 33 22
Hollow cylinder
652 589 00 33 23
Hydraulic hose (complete)
950 589 02 33 00
Removal and installation tool
950 589 01 33 00
Press-in/out tool
When removing/installing bearing bush, ensure that the appropriate removal and installation tool is used for the different bearing bush diameters.
Bearing bush dia. removal and installation tool
58 mm 652 589 00 33 01
60 mm 950 589 02 33 00
65 mm 652 589 00 33 02
75 mm 950 589 01 33 00
W32.35-1038-01
Remove
1 Screw threaded sleeve (2) into hydraulic cylinder (1) and tighten using
threaded spindle and appropriate thrust piece for pressing out at bearing bush.
2 Connect hydraulic hose to hydraulic pump and hydraulic cylinder (1) and press out bearing bush in direction of arrow.
W32.35-1036-01
Install
3 Insert bearing bush (4) and thrust piece for pressing in (6) into tapered sleeve (5).
4 Fit hydraulic cylinder (1) and tapered sleeve (5) at link rod and tighten with threaded spindle (7) and hexagon nut (8).
Always install the tapered sleeve with the bearing bush on the countersunk end of the link rod.
W32.35-1037-01
5 Connect hydraulic hose to hand pump and hydraulic cylinder (1) and pull in bearing bush.
Look through recess (arrow) in tapered sleeve (5) to check whether bearing bush is pressed all the way in.