AR32.35-T-2210CA | Removing and installing anti-roll bar on rear axle | 6.6.02 |
MODEL NMB613.367 /368 with REAR AXLE 746.211
MODEL NMB613.367 /368 with REAR AXLE 746.216
1 Split pin
2 Castle nut
3 Strut
4 Stabilizer
5 Screw
6 Bearing cap
T32.35-0004-03
| Remove/Install | ||
1 | Lift/jack up vehicle | ||
2 | Remove cotter pin (1). | Installation: Use new cotter pin (1). | |
3 | Unscrew castle nut (2) and brace (3) from stabilizer bar (4) | Installation: The specified tightening torque must be exceeded up to a maximum of reaching the next split pin hole. | |
| |||
| |||
4 | Unscrew bolts (5) from bearing cap (6) and remove stabilizer bar (4) | | |
5 | Install in the reverse order |
Rear axle stabilizer bar
Number | Designation | Model | |
BA32.35-N-1001-03H | Castellated nut connecting anti-roll bar rod to anti-roll bar | Nm | 265 |
BA32.35-N-1002-03H | Bolt, stabilizer bearing cover to rear axle | Nm | 188 |
Torque wrench
000 589 62 09 01