ar3235s221003s

Remove/install link rod for rear axle stabilizer bar

Type ar · emne 32.35 · version 0110 · 2011-10-21

Gælder for: MODEL 636 MODEL 639 with CODE (CL0) Rear air suspension, lowerable and liftable MODEL 639 with CODE (XZ1) Model generation 1 except CODE (ZG2) Permanent all-wheel drive except CODE (MA0) E-CELL 60 kW

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.35 Stabilisator — Serie 636 · Serie 639

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.40 tværgående styrestang/styring/stabilisator — Serie 636 · Serie 639

AR32.35-S-2210-03S

Remove/install link rod for rear axle stabilizer bar

Rear axle stabilizer bar

Number

Designation

Model
636

BA32.35-N-1001-03G

Bolt, link rod to semi-trailing arm

Nm

60

Rear axle stabilizer bar

Number

Designation

Model
639
with code
CL0

Model
639
without code ZG2,
without code MA0,
with code XZ1

BA32.35-N-1001-03G

Bolt, link rod to semi-trailing arm

Nm

60

60

Remove/install link rod for rear axle stabilizer bar

N32.35-2006-01

1 Remove bolt (1) .

2 Detach link rod (2) from stabilizer bar (3).

Using a suitable tool, pull link rod (2) off stabilizer bar (3).

3 Check rubber bushings on link rod (2) for wear and damage and replace if necessary.

4 Install in the reverse order.