ar3235d221001b

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

Type ar · emne 32.35 · version 0102 · 2001-08-21

Gælder for: MODEL 904 MODEL 690.612 /613

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.35 Stabilisator — Serie 690 (modeller 612, 613) · Serie 904

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.40 tværgående styrestang/styring/stabilisator — Serie 690 (modeller 612, 613) · Serie 904

AR32.35-D-2210-01B

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

Remove, install rubber mount at connecting rod of rear axle anti-roll bar

601 589 04 43 00

Insertion device

Remove, install rubber mount at connecting rod of rear axle anti-roll bar
Remove, install rubber mount at connecting rod of rear axle anti-roll bar

D32.35-0034-01

Remove

1 Use a suitable drift to press bearing bush in torsion bar and connecting rods out of bearing bosses.

Install

1 Coat rubber mount with assembly oil.

2 Draw rubber mount into anti-roll bar and connecting rods .

D32.35-0035-01