ar3233w0005na

Remove/install level control (CLCS) control unit

Type ar · emne 32.33 · version 0201 · 2015-09-16

Gælder for: Model 967

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.33 Niveauregulering (NR/ENR) — Serie 967

EinPAS 20 Undervogn › 20.20 Niveauregulering › 20.20.11 Styreenhed/relæ — Serie 967

AR32.33-W-0005NA

Remove/install level control (CLCS) control unit

14.09.2015

Model

967

Remove/install level control (CLCS) control unit

A26

Level control (CLCS) control unit

W32.33-2095-81

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Connect diagnostic system, start XENTRY and perform quick test

Only if the level control (CLCS) control unit (A26) was replaced.

The quick test is stored at the end of the diagnosis session as the initial quick test and can be printed out.

2.1

Perform control unit replacement

When level control (CLCS) control unit (A26) is replaced.

Control unit replacement is completely menu-assisted under:
"CLCS - level control (A26)"
"Adaptations"
"Initial startup"
"Control unit replacement"

Installation:Follow "Control unit replacement" instructions.

2.2

Switch off ignition

When level control (CLCS) control unit (A26) is not replaced.

3

Detach electrical connectors from level control (CLCS) control unit (A26)

4

Remove level control (CLCS) control unit (A26) from bracket

Level control system control unit or level control valve unit of rear axle to bracket

*BA32.30-N-1002-04B

5

Install in the reverse order

6

Calibrate level control (CLCS)

Only if level control (CLCS) control unit (A26) was replaced.

AR32.22-W-9000NA

Level control

Number

Designation

Model 967

BA32.30-N-1002-04B

Level control system control unit or level control valve unit of rear axle to bracket

M8

Nm

18

Henviste dokumenter