Remove/install level sensor

AR32.33-D-0009TSR

Remove/install level sensor

29.01.2020

Model

907

with code CB2 (Comfort air suspension)

Shown on right side, without code IT5 (5.0 ton vehicle)

1

Ball head rod

2

Bolts

3

Lever

4

Electrical connector

5

Rear level sensor

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on air suspension

AH32.22-N-1000-01H

 

Remove/install

1

Deactivate air suspension.

AR32.22-D-6000-02TSR

2

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

3

Remove ball head rod (1) from ball head of lever (3).

 Installation: Position ball head rod (1) and lever (3) as shown.
The ball head rod (1) must engage audibly in the ball head of the lever (3).

4

Disconnect electrical connector (4) from rear level sensor (5).

5

Remove rear level sensor (5).

 To do this, remove screws (2).

 Installation: Position rear level sensor (5) as shown.

 Screw, bracket to level sensor

*BA32.22-N-1005-03TS

6

Install in the reverse order.

Calibrate

7

Calibrating driving level.

AR32.22-D-9000TSR

 Compressor, valve unit, air suspension bellows, level sensor, compressed-air reservoir, crossmember

Number

Designation

Model 907
with code CB2 (Comfort air suspension)
except code IT5 (5.0 tonner)

Model 907
with code CB2 (Comfort air suspension)
with code IT5 (5.0 tonner)

BA32.22-N-1005-03TS

Screw, bracket to level sensor

Nm

5

5