Check shock absorbers for damage

Type ar · emne 32.25 · version 0101 · 2017-09-23

Gælder for: Model 414, 415, 447, 448, 601, 602, 611, 636, 638, 639, 900, 901, 902, 903, 904, 905, 906, 907, 909, 910

Ikke tilgængelig på “da”; vises på Engelsk.

AR32.25-D-0121-01A

Model

414, 415, 447, 448, 601, 602, 611, 636, 638, 639, 900, 901, 902, 903, 904, 905, 906, 907, 909, 910

W32.25-1005-71

Rubber joint bearing distorted or worn out


	Rubber joint bearing porous or cracked

W32.25-1004-71

1	Check the rubber joint bearing.

 On some shock absorbers, it is also possible to replace only the rubber joint bearing.

If rubber joint bearing is distorted, worn out, porous or cracked



Replace the shock absorber or the rubber joint bearing.

W32.25-1003-71

Slight paint wear on reservoir tube (1) (shock absorber is OK)


	Severe paint wear on reservoir tube (1) (shock absorber is not OK)

W32.25-1002-71

2	Visually inspect protective tube (2).

 If the fastening points are out of alignment, the protective tube (2) can rub against the reservoir tube (1) of the shock absorber and the shock absorber is under stress.
Slight paint abrasion is safe.
The vehicle must be at the vehicle level when screwing on firmly the bolted connection of the shock absorber.

With severe paint scraping



Replace the shock absorber.