ar3220p0300e

Removing and installing torsion bar on front axle

Type ar · emne 32.20 · version 0101 · 2004-10-20

Gælder for: MODEL 210.08 /28

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.20 Stålaffjedring, torsionsstang, niveaumat — Serie 210 (modeller 08*, 28*)

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 210 (modeller 08*, 28*)

AR32.20-P-0300E

Removing and installing torsion bar on front axle

2.9.96

MODEL 210.08 /28

Removing and installing torsion bar on front axle

P32.20-0253-06

Removing, installing

Installation

Replacing self-locking bolts and nuts

1

Remove lower engine compartment lining

AR61.20-P-1105AB

2.1

Detach linkage for headlamp range adjustment (95b) from lower wishbone (4)

Right side (if fitted)

3

Detach retainer (22b) from wishbone (4)

*BA32.20-P-1001-02E

4

Detach retainer (21b) from spring leaf swinging bracket (21)

Nut (21f)

*BA32.20-P-1002-02E

5

Remove torsion bar (22)

Installation:Center the torsion bar (22)

6

Detach spring leaf swinging bracket (21) and mounting plate (21c)

Observe assignment of spring leaf swinging bracket

The spring leaf swinging bracket (21) differs on the left and right.

Bolt (21d)

*BA32.20-P-1003-02E

7

Pull rubber mounts (22a, 21a) off torsion bar (22)

8

Install in reverse order

Front axle torsion bar

Number

Designation

Models 210.08/28

BA32.20-P-1001-02E

Bolt for bracket on wishbone

Nm

20

BA32.20-P-1002-02E

Nut for bracket on spring leaf swinging bracket

Nm

40

BA32.20-P-1003-02E

Bolt for spring leaf swinging bracket on front axle carrier

Nm

60

Henviste dokumenter