ar3220p030002vm

Detach/install link rod at torsion bar

Type ar · emne 32.20 · version 0106 · 2006-05-10

Gælder for: MODEL 211.08 /09 /28 /29

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.20 Stålaffjedring, torsionsstang, niveaumat — Serie 211 (modeller 08*, 09*, 28*, 29*)

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 211 (modeller 08*, 09*, 28*, 29*)

AR32.20-P-0300-02VM

Detach/install link rod at torsion bar

Front axle stabilizer bar

Number

Designation

Model
211.08/09/
28/29

BA32.20-P-1002-02B

Self-locking nut of connecting rod to torsion bar

M10

Nm

-

M101.5

Nm

-

M121.5

Nm

95

M141.5

Nm

-

Detach/install link rod at torsion bar

P33.20-2085-06

Removal

1 Unscrew self-locking nut (01) and bolt (02) of link rod (10) at stabilizer bar (11).

Checking

2 Check rubber mount of link rod (10) for damage and replace link rod (10) if necessary.

Install

3 Screw on self-locking nut (01) and bolt (02) of link rod (10) on stabilizer bar (11) .

Replace self-locking nut (01). Only tighten self-locking nut (01) when vehicle is ready to drive, turn steering if necessary.