ar3220p030002vb

Detach/install link rod at torsion bar

Type ar · emne 32.20 · version 0101 · 2011-04-14

Gælder for: MODEL 220.083 /084 /087 /183 /184 /187

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.20 Stålaffjedring, torsionsstang, niveaumat — Serie 220 (modeller 083, 084, 087, 183, 184, 187)

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 220 (modeller 083, 084, 087, 183, 184, 187)

AR32.20-P-0300-02VB

Detach/install link rod at torsion bar

Front axle stabilizer bar

Number

Designation

Model 220.083/
084/087/
183/184/
187

BA32.20-P-1002-02H

Nut, link rod to stabilizer bar

Nm

95

Detach/install link rod at torsion bar

P33.20-2094-06

Removal

1 Remove self-locking nut (01) and bolt (02) from link rod (10) on torsion bar (11).

Check rubber mounts of link rod (10) for damage, install new link rod (10) if necessary.

Installation

2 Screw in self-locking nut (01) and bolt (02) of link rod (10) on torsion bar (11) .

Replace self-locking nut (01). Only tighten self-locking nut (01) when vehicle is ready to drive, turn steering if necessary.