Remove/install bushes at rear spring and spring shackle

Type ar · emne 32.20 · version 0105 · 2003-09-15

Gælder for: MODEL 901, 902, 903 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7 MODEL 690.611 /63 /64

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.20 Stålaffjedring, torsionsstang, niveaumat — Serie 690 (modeller 611, 63*, 64*) · Serie 901 · Serie 902 · Serie 903

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 690 (modeller 611, 63*, 64*) · Serie 901 · Serie 902 · Serie 903

AR32.20-D-6721A

Remove/install bushes at rear spring and spring shackle

20.3.96

MODEL 901, 902, 903

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7

MODEL 690.611 /63 /64

D32.20-0001-06

1 Rear spring

2 Front bush (large)

3 Rear bush (small)

4 Lug

5 Bearing bush of spring shackle

Fig. item, etc.	Work instructions
	Remove rear spring		AR32.20-D-0230A
1	Rear spring
2, 3, 5	Bearing bushes	Use a suitable drift to press bearing bushes (2, 3, 5) out of the shackle and spring eyes.  Installation: Coat new bearing bushes with assembly oil. Press bearing bushes centered into spring shackle (4) and spring eyes.