D32.20-1120-11
1 Stabilizer bar
2 Auxiliary spring
3 Rear spring
4 Semi-trailing arm
5 Bolt
6 Bolt
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
Danger! | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under load | Use only approved tensioning devices; shield off hazard area if necessary. | |
1 | Lift/jack up vehicle | ||
2 | Secure vehicle on lifting platform | ||
3 | Support semi-trailing arm (4) in the area under the rear spring (3) with transmission jack | ||
4 | Unscrew bolt (6) from link rod | | |
5 | Unscrew bolt (5) from shock absorber on semi-trailing arm of low frame | | |
6 | Lower transmission jack until the rear spring (3) is relieved of load | ||
7 | Remove rear spring (3) | Check rear spring (3) and replace if necessary. | |
8 | Install in the reverse order |
Anti-roll bar
Number | Designation | Model | ||
BA32.35-N-1005-03B | Bolt/nut, link rod | M10 10.9 | Nm | 54 |
Rear axle shock absorber
Henviste dokumenter
- ar0060d0100h
- ar0060d1000h
- as0000z000101a Fare for kvæstelse på grund af fastklemning og knusning ved arbejde på fjedre eller fjederlegemer, som er under forspænding
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.