ar3200p1000lwe

Install/remove emergency buffer

Type ar · emne 32.00 · version 0100 · 2017-04-25

Gælder for: Model 213.2 except code 489 (AIRMATIC)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.00 Generelt — Serie 213 (modeller 2**)

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 213 (modeller 2**)

EinPAS 20 Undervogn › 20.20 Niveauregulering › 20.20.30 fjederbælg/støddæmper/fjederben — Serie 213 (modeller 2**)

EinPAS 20 Undervogn › 20.21 Støddæmpningsregulering › 20.21.31 Støddæmper/fjederben — Serie 213 (modeller 2**)

AR32.00-P-1000LWE

Install/remove emergency buffer

18.04.2017

Model

213.2

except code 489 (AIRMATIC)

Install/remove emergency buffer

P32.00-2079-09

1

Lower part of emergency buffer

3

Protective tube

2

Upper part of emergency buffer

4

Suspension strut mount

Danger

Risk of death caused by vehicle slipping or toppling off during lifting

Only lift vehicle at the lift support points specified by the vehicle manufacturer.

AS00.00-Z-0032-01A

Notes on level control

AH32.22-P-1001-02LWT

Install/remove

1

Raise vehicle at affected point at rear

AR00.60-P-1002LWG

2

Slide protective tube (3) downwards

3

Insert emergency buffer lower part (1) in upward direction up to end stop using guide pin

Set of emergency buffers

*205589003100

4

Insert emergency buffer upper part (2) in downward direction up to end stop using guide pin, and turn against emergency buffer lower part (1) up to end stop

Set of emergency buffers

*205589003100

5

Slide protective tube (3) together with emergency buffer lower part (1) and emergency buffer upper part (2) upward to suspension strut mount (4)

6

Slowly lower vehicle

AR00.60-P-1002LWG


The vehicle may be maneuvered only.
Otherwise damage to the vehicle may occur.

7

Remove in the reverse order

Install/remove emergency buffer

205 589 00 31 00

Set of emergency buffers

Henviste dokumenter