Modifying wheelbase

AR31.30-W-0025A

Modifying wheelbase

2.12.97



Notes on wheelbase modifications

AH31.30-N-0004-01A

1

Determine and mark out the parting point

 Position the parting points so that no holes in the frame side member are cut.

2

Expose the frame side member in the area of the parting point as much as is necessary

 Remove crossmembers, equipment racks, pipes and cables.

3

Remove propeller shafts

AR41.10-W-0050A

4

Support frame

5

Cut through frame side member

 Only metal-removing cutting methods should be applied since changes in the carbon structure occur if flame cutters are used.



General information on repairs to body

AH60.00-N-0001-01A

*WE58.40-Z-1002-03A

*WE58.40-Z-1003-03A

6

Welding side rails together

 When lengthening the frame, the material and profile of the intermediate piece must be the same as those of the frame side member.

AR31.30-W-0025-01A



General notes on welding

AH60.00-N-0005-01A

*WE58.40-Z-1001-02A

*WE58.40-Z-1002-03A

*WE58.40-Z-1003-03A

7

Reinforce vehicle frame

AR31.30-W-0035A

8

Install propeller shafts

AR41.10-W-0050A

9

Lengthen wiring harnesses

AR54.18-W-0105A

10

Reinstall parts removed in the area of the parting point

WE58.40-Z-1001-02A

Inert gas welder

WE58.40-Z-1002-03A

Straight grinder (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)