Frame
Número | Denominação | Chassis 958.0, 958.1 | Chassis 958.2 | |||
BA31.30-B-1001-01J | Screw with flange for connection Huck - Spin | M14x1.5 | Nm | - | 150...180 | |
M16x1.5 | Nm | - | 230...270 | |||
BA31.30-B-1002-01J | Framework screws | M12x1.5 | Nm | 100...120 | 100...120 | |
M14x1.5 | Nm | 150...180 | 120...180 | |||
M16x1.5 | Nm | 230...270 | 230...270 | |||
M18x1.5 | Nm | 350...410 | 350...410 | |||
Frame
Número | Denominação | Chassis 958.4 | |||
BA31.30-B-1001-01J | Screw with flange for connection Huck - Spin | M14x1.5 | Nm | - | |
M16x1.5 | Nm | - | |||
BA31.30-B-1002-01J | Framework screws | M12x1.5 | Nm | 100...120 | |
M14x1.5 | Nm | 120...180 | |||
M16x1.5 | Nm | 230...270 | |||
M18x1.5 | Nm | 350...410 | |||
W31.30-0063-11
1 Prepare the reinforcement pieces (2) according to drawings.
The reinforcement pieces may be longer, but never shorter, and must also not overshoot in relation to the belt strap. The reinforcement pieces must not be adjusted to the U profile and may present clearance in one or both sides.
2 With bolts, attach the reinforcement pieces (2) on the side rails (1).
As far as possible, utilize the available drilled grille.
Example of the reinforcement pieces measurements
1 Chassis side rail
2 Reinforcement piece
a 20 % of the protrusion's height
b 50 mm
c Available bores in the side rail
d 1000 mm
and > 300 mm
f 60 mm
g > 20 mm
W31.30-0064-11
Example of measurements of the reinforcement piece 2
1 Chassis side rail
2 Reinforcement piece
a 20 % of the protrusion's height
b 50 mm
c Available bores in the side rail
f 60 mm
g > 20 mm
h = 500 mm