AR30.35-W-1100B | Remove/install foot throttle actuator | 7.7.10 |
ENGINE 904.9 in MODEL 375 with BODY 375.830
ENGINE 904.9 in MODEL 958 with BODY 958.860 except CODE (XV0) Global cockpit
ENGINE 904.9 in MODEL 970, 972, 975, 976 with BODY 972.899
ENGINE 906.9 in MODEL 375 with BODY 375.810
ENGINE 906.9 in MODEL 950, 952, 953, 954 with BODY 940.899
ENGINE 906.9 in MODEL 958 with BODY 958.860 except CODE (XV0) Global cockpit
ENGINE 906.9 in MODEL 958 with BODY 958.870 except CODE (XV0) Global cockpit
ENGINE 906.9 in MODEL 970, 972, 974, 975, 976 with BODY 972.899
ENGINE 924.9 in MODEL 958 with BODY 958.860 except CODE (XV0) Global cockpit
ENGINE 924.9 in MODEL 970, 972, 974, 975, 976 with BODY 972.899
ENGINE 926.9 in MODEL 950, 952, 953, 954 with BODY 940.899
ENGINE 926.9 in MODEL 958 with BODY 958.870 except CODE (XV0) Global cockpit
W30.35-1110-11
Illustrated on body 940.899
1 Footwell trim on driver-side
2 Cap
3 Union nut
X13 Diagnostic socket
W30.35-1111-01
Illustrated on body 940.899
4 Electrical connector
5 Bolts
B1 Foot throttle actuator
Modification notes
| Remove/install | ||
1 | Switch off ignition | ||
2 | Unscrew union nut (3) from diagnostic socket (X13) and remove cap (2) | ||
3 | Remove footwell trim on driver-side (1) on the right next to the steering column | Installation: Slide bottom edge of footwell trim on driver-side (1) into bracket on floor panel. Pay attention to the position of the lug at the diagnostic socket. | |
4 | Disconnect electrical connector (4) of the foot throttle actuator (B1) at the multipoint connector | ||
5 | Unscrew bolts (5) and remove foot throttle actuator (B1) | | |
6 | Install in the reverse order | ||
7 | Teach in foot throttle actuator (B1) using STAR DIAGNOSIS | Only if foot throttle actuator (B1) has been replaced. | |
8 | Read out fault memory in the drive control, control unit with STAR DIAGNOSIS and delete faults if necessary |
Accelerator pedal