Remove/install radar sensor with bracket

Type ar · emne 30.30 · version 0100 · 2011-08-18

Gælder for: MODEL 930, 932, 933, 934, 940, 942, 943, 944, 958 as of 1.9.10 with CODE (ET5) Autonomous intelligent cruise control MODEL 930, 934 as of 1.9.10 with CODE (BC7) Active Brake Assist (ABA)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.30 Tempomat (TPM), DISTRONIC (DTR), aktiv bremseassistent — Serie 930 · Serie 932 · Serie 933 · Serie 934 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 958

EinPAS 28 Komfort-/førerassistancesystem › 28.26 Afstandsregulering › 28.26.12 Sensor/kontakt/ledningssæt — Serie 930 · Serie 932 · Serie 933 · Serie 934 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 958

AR30.30-W-1200B

Remove/install radar sensor with bracket

10.8.11

MODEL 930, 932, 933, 934, 940, 942, 943, 944, 958 as of 1.9.10 with CODE (ET5) Autonomous intelligent cruise control

MODEL 930, 934 as of 1.9.10 with CODE (BC7) Active Brake Assist (ABA)

Remove/install radar sensor with bracket

W54.21-1434-12

1 Cover

2 Bolts

3 Bracket

4 Connector

A63.1 Radar sensor control unit (ART)

 	Remove/install
1	Take off cover (1)
2	Unplug connector (4)
3	Remove radar sensor controller unit (ART) (A63.1) with bracket (3)
4	Remove radar sensor controller unit (ART) (A63.1) from bracket (3)
5	Install in the reverse order
6	Attach Star Diagnosis and start "XENTRY Diagnostics"
7	In "ART control unit" select the menu item "Service adjustment of the radar sensor by means of an adjustment drive" over the menu "control unit adaptations"	 The further process is menu-assisted. Follow instructions given by the system.