ar3030s1010e

Remove/install Distronic sensor (DTR)

Type ar · emne 30.30 · version 0102 · 2016-02-08

Gælder for: Model 447.8, 448.8 with code ET4 (DISTRONIC PLUS) Model 447 with code JP2 (Driving Assistance package)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.30 Tempomat (TPM), DISTRONIC (DTR), aktiv bremseassistent — Serie 447 · Serie 448 (modeller 8**)

EinPAS 28 Komfort-/førerassistancesystem › 28.26 Afstandsregulering › 28.26.12 Sensor/kontakt/ledningssæt — Serie 447 · Serie 448 (modeller 8**)

AR30.30-S-1010E

Remove/install Distronic sensor (DTR)

21.01.2016

Model

447.8, 448.8

with code ET4 (DISTRONIC PLUS)

Model

447

with code JP2 (Driving Assistance package)

Remove/install Distronic sensor (DTR)

1

Radiator trim

7

Retaining clip

8

Cover

S88.00-4512-05

Remove/install Distronic sensor (DTR)

1

Radiator trim

2

Support brace

3

Quick-release coupling

S30.30-4519-06

Remove/install Distronic sensor (DTR)

1

Radiator trim

4

Cover

5

Ball stud

6

Electrical connection

A89

Distronic (DTR) control unit

S30.30-4520-06

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Remove retaining clips (7) and remove cover (8)

Installation: Check retaining clips (7) for damage.

For damage

Replace respective retaining clip (7)

3

Open quick-release coupling (3), remove catch hook (arrows A) and remove fitting (2)

4

Push radiator trim (1) slightly to the front, unlock locks (arrows B) and remove cover (4)

5

Pull DISTRONIC (DTR) control unit (A89) out of the holder

The DISTRONIC (DTR) control unit (A89) is enraged with three ball studs (5) in holder.

6

Unlock and detach electrical connection (6) on DISTRONIC (DTR) control unit (A89)

7

Install in the reverse order

8

Perform adjustment of the DISTRONIC (DTR) control unit (A89) with diagnostic system

AD00.00-S-2000-04E

000 588 17 21 00 Adjusting device

WS30.00-P-0006B

Henviste dokumenter