Remove idle speed control (ISC) actuator, install

Type ar · emne 30.22 · version 0101 · 2004-04-15

Gælder for: ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.22 Tomgangsregulering (LLR) — Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.31 Servomotor/indstillingsled/blandingsregulator — Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

Gælder også for motorer/gearkasser: 111 984

AR30.22-D-1152B

Remove idle speed control (ISC) actuator, install

19.8.99

ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

D30.22-1102-12

1 Idle speed control actuator

2 Connector

3 Screw

4 Cable of purge control valve/actuator

 	Remove/install
1	Remove air intake hose		AR09.10-D-8030F
2	Undo connector (2)
3	Unscrew four bolts (3), take idle speed control actuator (1) off the intermediate flange at the intake manifold and disconnect cable (4)		*BA30.22-N-1001-01A
4	Install in the reverse order

 Idle speed control (ISC)

Number	Designation		Engine 111.979/ 984


BA30.22-N-1001-01A	Idle speed control (ISC) actuator to intermediate flange	Nm	10