ar3022d115201c

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

Type ar · emne 30.22 · version 0102 · 2000-02-08

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.22 Tomgangsregulering (LLR) — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.31 Servomotor/indstillingsled/blandingsregulator — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

Gælder også for motorer/gearkasser: 111 979

AR30.22-D-1152-01C

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

Idle speed control (ISC))

Number

Designation

Engine 111.979/
984

BA30.22-N-1001-01A

Idle speed control (ISC) actuator at intermediate flange

Nm

10

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

D30.22-1002-01

1 Detach connecting rod (2) at throttle valve lever.

Installation: After attaching the connecting rod (2) the throttle valve lever must be positioned against the microswitch (arrow).

2 Detach restoring spring (3) at throttle valve lever.

3 Take off vacuum line (1) at idle speed control actuator.

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

D30.22-1003-01

4 Unscrew hexagon socket bolts (4) and place idle speed control actuator (5) to the side with electrical connection.

Installation: Pay attention to tightening torque.

5 Install in the reverse order.