Shown on model 470 |
1 | Nuts |
2 | Electrical connector |
3 | Electronic accelerator |
S30.20-4511-05
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove footwell trim on driver-side | ||
3 | Release and disconnect electrical connection (2) | ||
4 | Unscrew nuts (1) | Nut, accelerator pedal to mounting bracket | |
5 | Remove electronic accelerator (3) | ||
6 | Install in the reverse order | ||
7 | Read out and erase fault memory | After replacing the electronic accelerator (3). | |
| |||
8 | Teach in accelerator pedal sensor | When replacing the accelerator pedal (3). | |
Henviste dokumenter
- ad0000s200006p
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar3020s200001p
- ar6810s1701p