ar3010d101012a

Adjustment of control pressure cable

Type ar · emne 30.10 · version 0103 · 2000-02-02

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 with TRANSMISSION 722.376 with CODE (G40) Automatic transmission W4A028

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.10 Mekanisk regulering — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.35 Motorregulering — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

Gælder også for motorer/gearkasser: 111 979, 722 376

AR30.10-D-1010-12A

Adjustment of control pressure cable

Adjustment of control pressure cable

D30.10-0010-01

1 Detach control pressure bowden cable (1) at ball head and move accelerator pedal into CTP position.

Adjustment of control pressure cable

D30.10-0011-01

2 Push control pressure bowden cable back (arrow) and then pull forward again until a resistance is felt (relay lever in transmission is resting against control pressure slide).
Adjust control pressure bowden cable by turning the adjusting screw (2) so that it can be pressed onto the ball head at the throttle control lever free of stress.