ar2910d030001a

Remove, install over-center spring of clutch pedal

Type ar · emne 29.10 · version 0104 · 2001-09-07

Gælder for: MODEL 901.0 /4, 902.0 /4, 903.0 /4, 904.0 /4, 905.6 except CODE (G40) Automatic transmission MODEL 901.6, 902.6, 903.6, 904.6 except CODE (GD5) Automated manual transmission 716.643 MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 29 Pedalsystem › 29.10 Pedaler, lejebuk — Serie 690 (modeller 6**) · Serie 901 (modeller 0**, 4**, 6**) · Serie 902 (modeller 0**, 4**, 6**) · Serie 903 (modeller 0**, 4**, 6**) · Serie 904 (modeller 0**, 4**, 6**) · Serie 905 (modeller 6**)

EinPAS 17 Drivstreng/aksel › 17.15 Kobling › 17.15.5 koblingsbetjening — Serie 690 (modeller 6**) · Serie 901 (modeller 0**, 4**, 6**) · Serie 902 (modeller 0**, 4**, 6**) · Serie 903 (modeller 0**, 4**, 6**) · Serie 904 (modeller 0**, 4**, 6**) · Serie 905 (modeller 6**)

AR29.10-D-0300-01A

Remove, install over-center spring of clutch pedal

Remove, install over-center spring of clutch pedal

901 589 00 31 00

Spring compressor

Remove, install over-center spring of clutch pedal

D29.10-0008-02

1 Pull locking element off pin of clutch pedal.

2 Slacken over-center spring by depressing clutch pedal.

3 Tension over-center spring with (01) and pull it off the pin of the clutch pedal.

Installation: Insert the spring in tensioned condition only with spring disk at pedal bearing bracket.