ar2850p200003a

Installing power take-off output shaft

Type ar · emne 28.50 · version 0100 · 1999-01-28

Gælder for: MODEL 460, 461 with TRANSFER CASE 750.60 with CODE (N03) Zwischengetriebe mit Nebenantrieb

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 28 Fordelergearkasse › 28.50 Hjulsæt, aksler — Serie 460 · Serie 461

EinPAS 17 Drivstreng/aksel › 17.22 Fordelergearkasse › 17.22.45 Aksel/tandhjul/synkronisering — Serie 460 · Serie 461

Gælder også for motorer/gearkasser: 750 60*

AR28.50-P-2000-03A

Installing power take-off output shaft

Transfer case 750.60

Installing power take-off output shaft

P28.10-2121-01

1 Install ball bearing using suitable drift.

Installing power take-off output shaft

P28.10-2122-01

2 Install output shaft (3) with gear wheel and shim.

The offset side of washer must point towards bearing.

Installing power take-off output shaft

P28.10-2123-01

3 Insert thrust washer (4).

Installing power take-off output shaft

P28.10-2124-01

4 Install inner and outer seal rings.

Pack space between sealing lips with grease.

Installing power take-off output shaft

P28.10-2125-01

5 Insert shim, press in ball bearing using suitable drift.

The offset side of shim must point towards bearing.

Installing power take-off output shaft

P28.10-2126-01

6 Insert thrust washer (5).