Remove/install radial shaft sealing ring at output flange to rear axle

AR28.10-P-4150A

24.11.08

MODEL 460, 461 with TRANSFER CASE 750.60

P28.10-2137-06

1 Housing cover

2 Inner radial shaft sealing ring

3 Outer radial shaft sealing ring

4 Output flange

5 Nut

	Removing
	The operations can also be carried out on an installed transfer case. Shift the manual transmission into 1st gear and the transfer case into the GA-position. Apply hand brake.
1	Remove rear axle output flange (4)		AR28.10-P-4150-01A
2	Remove shaft seal (2, 3) on rear axle output flange		AR28.10-P-4150-03A
			*460589023300
	Install
3	Install shaft seal (2, 3) on rear axle output flange		AR28.10-P-4150-04A
			*460589021500
			*BR00.45-Z-1017-06A
4	Install rear axle output flange (4)		AR28.10-P-4150-02A
		 Nut on output flange to front and rear axle	*BA28.40-P-1003-01A
		 Bolt, propeller shaft on output flange and drive flange	*BA28.40-P-1005-01A
		 Socket	*001589160900
		 Retainer wrench	*460589013100
		 Open end wrench bit 13 mm	*000589109916
		 Torque wrench	*001589662100
			*BR00.45-Z-1048-06A

 Transfer case housing

Number	Designation		Model 460, 461 with transfer case 750.60


BA28.40-P-1003-01A	Nut on output flange to front and rear axle	Nm	200
BA28.40-P-1005-01A	Bolt, propeller shaft on output flange and drive flange	Nm	35

460 589 01 31 00

Open-end wrench bit 13 mm

Retainer wrench

Wrench socket

Torque wrench

001 589 16 09 00

000 589 10 99 16

001 589 66 21 00

Drift

460 589 02 15 00

Puller

460 589 02 33 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-06A	MB multipurpose grease	A 001 989 34 51 11
BR00.45-Z-1048-06A	Loctite anti-seize	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de