Remove/install output flange

AR28.10-P-4080-02MSA

Remove/install output flange

Transmission

725.0 in model 257

 Complete transfer case

Number

Designation

Model 205, 213, 217, 218, 222, 223, 238, 253, 257, 290 with transmission 725.0/1
with code M005 (Vehicles with 4MATIC/all-wheel drive)

BA28.10-P-1006-01G

Nut, output flange to transfer case

Nm

200

1

Screw 2 bolts into output flange (2).

2

Counterhold output flange (1)  with counterholder at 2 bolts.

3

Unscrew twelve-point collar nut (2) using   socket wrench socket from output shaft  (3).

4

Remove output flange (1).

 If output flange (1) is stuck   use two-armed puller (08).

5

Slide output flange (1) onto output shaft (3).

6

Counterhold output flange (1) using  counterholder on 2 bolts and tighten twelve-point collar nut (2) using   socket wrench socket  .

 Replace twelve-point collar nut (2).

Example illustration

7

Secure twelve-point collar nut (2); to do so, pound collar into grooves of output shaft (3) using a punch (arrow).

 There are two grooves located on the output shaft (3), into which the collar of the twelve-point nut (2) must be pounded (arrow).

8

Remove 2 bolts from output flange (1).