Remove/installing radial shaft seal at output flange to front axle

AR28.10-P-4075A

24.11.08

MODEL 460, 461 with TRANSFER CASE 750.60

P28.10-2136-06

1 Nut

2 Connector flange

3 Outer radial shaft sealing ring

4 Inner radial shaft sealing ring

5 Cover

6 Spacer tube

7 Disk spring

8 Nut

9 Connector flange

10 Outer radial shaft sealing ring

11 Inner radial shaft sealing ring

12 Cover

13 Gasket

14 Oil drain plug

	Removing
	The work procedure for the output or drive has the same contents. The operations can also be carried out on an installed transfer case. In each case the propeller shaft is to be detached at the flange. For a better display the work has been carried out on a transfer case which has been removed.
1	Remove output flange		AR28.10-P-4075-01A
		 Retainer wrench	*460589013100
		 Socket	*001589160900
		 Puller	*460589023300
2	Remove shaft seal from output flange		AR28.10-P-4075-03A
			*460589003500
	Install
3	Install the shaft seal in the output flange	 The two radial shaft sealing rings have the same dimensions; they are just made from different materials	AR28.10-P-4075-04A
			*460589021500
			*BR00.45-Z-1017-06A
4	Install front axle output flange		AR28.10-P-4075-02A
		 Nut on output flange to front and rear axle	*BA28.40-P-1003-01A
		 Bolt, sealing flange on front axle output shaft	*BA28.40-P-1012-01A
		 Socket	*001589160900
		 Retainer wrench	*460589013100
		 Open end wrench bit 13 mm	*000589109916
		 Torque wrench	*001589662100
			*BR00.45-Z-1048-06A

 Transfer case housing

Number	Designation		Model 460, 461 with transfer case 750.60


BA28.40-P-1003-01A	Nut on output flange to front and rear axle	Nm	200
BA28.40-P-1012-01A	Bolt, sealing flange on front axle output shaft	Nm	10

000 589 10 99 16

Wrench socket

Open-end wrench bit 13 mm

Retainer wrench

Puller

460 589 01 31 00

001 589 16 09 00

460 589 02 33 00

Pressure screw M 8

460 589 00 35 00

Drift

460 589 02 15 00

Torque wrench

001 589 66 21 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-06A	MB multipurpose grease	A 001 989 34 51 11
BR00.45-Z-1048-06A	Loctite anti-seize	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de