ar2810p010004a

Lift out/insert transfer case

Type ar · emne 28.10 · version 0102 · 2009-09-08

Gælder for: MODEL 460, 461 with TRANSFER CASE 750.60

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 28 Fordelergearkasse › 28.10 Gearkasse komplet — Serie 460 · Serie 461

EinPAS 17 Drivstreng/aksel › 17.22 Fordelergearkasse › 17.22.80 fordelergearkasse komplet — Serie 460 · Serie 461

Gælder også for motorer/gearkasser: 750 60*

AR28.10-P-0100-04A

Lift out/insert transfer case

Transfer case 750.60

Transfer case complete

Number

Designation

Model
460, 461, 463
with transfer case 750.6

BA28.10-P-1001-01B

Bolt, transfer case to transmission suspension

Nm

40

Lift out/insert transfer case

P28.10-2087-01

Lift out transfer case

1 Support transfer case underneath using vehicle jack.

Lift out/insert transfer case

P28.10-2088-01

2 Detach transfer case at the transmission mounts (arrows).

3 Lower the right side of the transfer case slightly, move the left of the case forward and then lower the entire unit.

Lift out/insert transfer case

P28.10-2089-01

4 Check rubber mounts for wear.

Lift out/insert transfer case

P28.10-2090-01

Insert transfer case

5 Lift up transfer case and mount with the left rear support on the mounting console.

Replace all self-locking nuts. In each case install the large washers on the rubber mount, the small washers between the bolt head or nut and housing.