ar2760t1130ac

Checking modulating pressure

Type ar · emne 27.60 · version 0101 · 2009-11-09

Gælder for: TRANSMISSION 721.108 /109 /141 /151 /181 /182

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.80 Gearkasse komplet

Gælder også for motorer/gearkasser: 721 109, 721 141, 721 151, 721 182

AR27.60-T-1130AC

Checking modulating pressure

27.10.09

TRANSMISSION 721.108 /109 /141 /151 /181 /182

Checking modulating pressure

T27.10-0007-01

Pressure measuring points

1 Primary pressure (PH)

2 Throttle pressure (PD1)

3 Pressure upstream of converter (PD2)

4 Pressure downstream of heat exchanger (PD6PD7)

5 Retarder pressure (PR3)

6 Retarder control pressure (PRR3)

Checking modulating pressure

T27.10-0008-01

Pressure gauge connection

Checking

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

1

Check oil level

If necessary, perform oil change.

Automatic transmission - oil and filter change

AP27.00-T-2702A

2

Remove the screw plug (1-6) to match the pressure test

Remove screw plug to match the pressure to be measured (1, 2, 3, 4, 5, 6). Never remove 2 screws at the same time.

To perform the test the transmission must be at operating temperature (temperature of oil approx. 80 - 90 °C ), and the oil level and oil quality must be OK.

3

Connect pressure gauge

*123589042100

*123589042102

4

Carry out pressure test

The specified values for each of the pressures to be measured are assigned to specific operating conditions.

Pressure measuring table

AR27.60-T-1130-01AC

5

Disconnect pressure gauge

*123589042100

*123589042102

6

Screw-in screw plug

Replace sealing ring.

*BA27.10-N-1004-03A

Oil pan, automatic transmission

Number

Designation

Transmission
721.141

BA27.10-N-1004-03A

Screw plug for pressure gauge connection

Nm

12

Checking modulating pressure
Checking modulating pressure

123 589 04 21 02

Connector

Tester

123 589 04 21 00

Henviste dokumenter