ar2760d663502a

Removing, installing cable

Type ar · emne 27.60 · version 0100 · 1999-04-12

Gælder for: TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 TRANSMISSION 722.376 in MODEL 901.0, 902.0, 903.0, 904.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 901 (modeller 0**, 4**) · Serie 902 (modeller 0**, 4**) · Serie 903 (modeller 0**, 4**) · Serie 904 (modeller 0**, 4**)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 901 (modeller 0**, 4**) · Serie 902 (modeller 0**, 4**) · Serie 903 (modeller 0**, 4**) · Serie 904 (modeller 0**, 4**)

Gælder også for motorer/gearkasser: 722 375, 722 376

AR27.60-D-6635-02A

Removing, installing cable

Removing, installing cable

D27.60-0029-01

1 Press cover (7) off selector lever (11) with a screwdriver.

Removing, installing cable

D27.60-0030-01

2 Press grip cap (2) off with a screwdriver.

3 Pull off knob button(1).

Removing, installing cable

D27.60-0031-01

4 Pull lever (3) off mounting in grip insert and unhook control cable (8).

Removing, installing cable

D27.60-0032-01

5 Pull tab washer (4) off control cable connector sleeve.

6 Remove grip insert (6).

Removing, installing cable

D27.60-0033-01

7 Remove control cable (8) from guide in selector lever, pull upwards and remove plastic bush (9).

Installation note

Pay attention to installed position.

8 Install in reverse order.