ar2760d663501a

Removing, installing shift gate

Type ar · emne 27.60 · version 0100 · 1999-04-12

Gælder for: TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 TRANSMISSION 722.376 in MODEL 901.0, 902.0, 903.0, 904.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 901 (modeller 0**, 4**) · Serie 902 (modeller 0**, 4**) · Serie 903 (modeller 0**, 4**) · Serie 904 (modeller 0**, 4**)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 901 (modeller 0**, 4**) · Serie 902 (modeller 0**, 4**) · Serie 903 (modeller 0**, 4**) · Serie 904 (modeller 0**, 4**)

Gælder også for motorer/gearkasser: 722 375, 722 376

AR27.60-D-6635-01A

Removing, installing shift gate

Removing, installing shift gate

D27.60-0027-01

1 Turn the cup seal up away from selector lever.

2 Unscrew 1st gearshift (13) from bearing bracket.

up to vehicle end no. 689837

Removing, installing shift gate

D27.60-0024-01

3 Pull locking device (15) off bearing pin (17).

4 Pull bearing pin out halfway.

Removing, installing shift gate

D27.60-0025-01

5 Pull lever (19) out of the bearing bracket (16).

Installation note

Pay attention to installed position.

Removing, installing shift gate

D27.60-0026-01

6 Pull pin (10) out of fork-shaped piece of selector lever (11).

7 Pull bearing pin out completely and remove selector lever from bearing bracket.

Removing, installing shift gate

D27.60-0028-01

8 Unscrew gate (18) from bearing bracket (16).

9 Install in reverse order.